Cement & Putty

Here's a new type of adhesive from the Mr. Hobby folks! Compared with the former pour on type adhesive, drying speed has been dramatically improved and adhesive strength enhanced. ...

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a...

Tamiya White Putty is an improved version of the basic putty; this offering comes in a shade of white that will have little to no effect on the final paint color! Useful for fillin...

Here is a low-viscosity version of Mr. White Putty! This type makes it easier to apply to small areas for more precise work, and any excess will cut smoothly off after curing.

This is made from material extracted from natural Limonene and smells orange, with no irritating thinner smell. The pen form allows easy application between parts.

Attach parts together by pouring this cement into the space between them. The cement is non-resin so parts won't dissolve while your assembling them. Its cap has thin brush that ma...

This is made from material extracted from natural Limonene and smells orange. That means there's no irritating smell like thinner! The very fine brush attached at the tip of the ca...

Here's a version of Tamiya's wildly popular extra thin cement that takes 1/4 of the time to dry! Because of that, it's not ideal for removing larger seamlines, but rather for fixin...

This is liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. The hexagonal 20ml bottle includes an app...

Liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. This extra thin formula cement is used to glue to...

Mr. White Putty, a vast improvement on Mr. Putty, maintains the meticulous detail while increasing workability even further. The smoothness of the final product is better than ever...

P120 is a lightweight epoxy putty created by mixing two types of putty. Since this type is high-density, it completely hardens in one hour, making this putty best suited for fine a...

P121 is an ultra-lightweight epoxy putty most suitable for the core of a pattern of a figure. This hardens in one hour and is easy to cut like P120. It can also be used alone or in...